The donor engine

Ed has found the VR6 engine we are going to use as the base for this project: It came out of a 2002 Jetta that he found in Canada(!). He says it is in pristine condition and I certainly agree just looking at these pictures:

Here is a bunch of of pictures showing the varying stages of assembly. Basically, Ed tore down the engine, did a thorough inspection and cleaning. Then he installed a new oil pan [early model "AAA" style pan that provides more clearance with the frame), timing chains, timing chain rails and tensioner. New front and rear seals were also installed and the block was cleaned and painted black.

The cylinder head was completely disassembled, cleaned and reassembled with the new high strenght bolts from ARP. A thicker stainless steel head gasket spacer was purchased from urotuning and installed to get the compression down to a 9:1 ratio in preparation for the forced induction. Ed explained that you actually have to slice an OEM head gasket open and then sandwich the spacer in between. 



Back together again

The new adapter plate fits like a glove:

Adapterplate fitted onto the new engine